OUR OPERATIONS
MAKING EVERY RESOURCE
COUNT
Producing and delivering food-to-go at scale comes with responsibility. From the energy used in our manufacturing facilities to the vehicles delivering products across the UK, we continually look for ways to improve efficiency, reduce unnecessary waste and make better use of our resources.

IMPROVING THE WAY WE MAKE AND DELIVER FOOD
Our operations bring together manufacturing, refrigeration, packing, storage and distribution. Each stage uses resources, so we focus on making our processes as efficient as possible while maintaining the quality, safety and service our customers expect. From managing energy and water to planning deliveries and preventing waste, we look for improvements that make a practical difference across our sites.
188 MWh
Generated by our Welsh solar installation during 2026 to date
30%
Reduction in energy use per pack in 2026 compared with our 2023 baseline
100
Daily delivery rounds planned across
the network.

MAKING MORE USE
OF RENEWABLE ENERGY
Generating renewable electricity on site helps us reduce the amount of electricity we need to take from the grid. At our Wales site, our solar installation makes a contribution to the electricity we use, with the site around 40% self-sustaining through solar.
​
During 2026 to date, the installation has generated 188 MWh (188,000 kWh) of electricity. We monitor this generation to understand how much of our energy needs can be met by the panels.
​
We continue to assess opportunities for renewable electricity and further on-site solar where they are technically and commercially viable. Our ambition is to use renewable-backed purchased electricity at every site we control, supported by auditable certificates and annual reporting.
USING ENERGY MORE
EFFICIENTLY
Reducing the energy needed to manufacture each product helps us make better use of the resources that keep our sites running. In 2026, we recorded a 30% reduction in energy use per pack compared with our 2023 baseline.
​
Our sites use modern production, refrigeration and packing equipment selected for performance and efficiency. We also use variable-speed drive technology where motors operate under varying loads. This allows motor speeds to respond to the work required, rather than always running at the same speed.
​
We continue to look at the way equipment is operated and maintained, alongside lighting, refrigeration controls and other opportunities to improve efficiency. These areas all form part of our ongoing work to manage energy use across our operations.
BUILDING EFFICIENCY INTO OUR NEW BRADFORD FACTORY
We're designing our new Bradford factory with energy efficiency and sustainability in mind. Alongside planned solar panels, we're incorporating a fully electric site and LED lighting into the design, with efficient refrigeration equipment also planned. We're exploring further opportunities, including battery storage, lower-carbon heating and rainwater harvesting.
502.90 kWp
Proposed solar capacity, subject to final project confirmation

Moving our products efficiently
Our vehicles are an essential part of getting fresh products to customers across our distribution network. We work to reduce the impact of these journeys by making good use of vehicle capacity, planning routes carefully, maintaining our fleet and replacing older vehicles with more efficient models.
​
We replace around 20% of our van fleet each year. This gradual renewal helps us move older vehicles out of the fleet over time. We are also assessing electric and other lower-emission vehicle and fuel options as the technology develops.
​
We are working towards reducing emissions across our transport operations, with a focus on improving vehicle efficiency and exploring lower-emission alternatives.
PLANNING BETTER JOURNEYS
We plan around 120 delivery rounds each day across our six depots, although the number varies depending on the day. Careful route planning helps us serve customers efficiently while maintaining delivery times, product quality and temperature control.
​
We use Mezze ePOD to support route planning and electronic proof of delivery. The system helps us allocate customers and drivers and records when deliveries have been completed, giving our teams a digital record of each delivery.
OVER 1OO
Delivery rounds we plan each day. The number varies by day.
6 DEPOTS
We coordinate delivery activity across six depots.
GROUPING DELIVERIES
We group customers by location so that deliveries in similar areas can be planned together. This helps avoid unnecessary long-distance journeys without a delivery.
CHOOSING THE RIGHT VEHICLE
We consider order volumes and delivery times when matching vehicles to routes. This helps us make appropriate use of vehicle space while meeting customer requirements.
ALLOCATING CUSTOMERS AND DRIVERS
Mezze ePOD calculates expected vehicle weight, which supports the allocation of customers and drivers to delivery rounds.
Our route planning has developed from the pen-and-paper methods and A–Z maps we used historically. Technology now allows us to consider customer locations, vehicle capacity, delivery requirements and distances more quickly. Mileage and fuel consumption can be monitored to assess the environmental benefits of route planning, although we do not currently have a verified percentage reduction in mileage to report.
PREVENTING WASTE AND USING MATERIALS CAREFULLY
We focus on preventing waste wherever we can, rather than only dealing with it once it has been created. In production, this means planning carefully, making the best use of ingredients and reviewing processes when avoidable losses occur.
PLANNING PRODUCTION
We use forecasting and production planning to help reduce avoidable surplus and waste.
USING LESS
PACKAGING
We have removed some unnecessary secondary packaging and reduced the weight of primary packaging in parts of our range.
SORTING
MATERIALS
Where site services allow, we separate materials such as cardboard, plastic, metal and food waste at source.
WHAT HAPPENS TO
FOOD WASTE?
We prioritise preventing avoidable food waste through forecasting, production planning and stock control. Where food waste cannot be avoided, our preferred approach is to consider suitable reuse or redistribution first, followed by recycling, anaerobic digestion and other appropriate recovery routes.
​
Suitable surplus food may be redistributed through charitable organisations where timing, remaining shelf life and arrangements with the receiving charity allow. This means food must be safe and suitable to use, and there must be a practical way to get it to an organisation that can accept it.
HOW WE MANAGE
AND MONITOR WASTE
Our waste streams can include cardboard, plastics, metals, food waste, general waste and specialist waste. We separate materials at source where the services at each site allow, and use appropriate waste-management routes for residual and specialist waste.
​
We monitor waste through contractor collection and weight data alongside site and production information. This helps us understand the waste we generate and identify where we can improve. We are working towards more consistent information across our sites so that we can track waste, recycling and recovery more clearly.
MANAGING WATER
RESPONSIBLY
Water is essential to our operations, including cleaning and maintaining hygienic production environments. We manage its use through controlled cleaning, maintenance and day-to-day operational practices, while looking for opportunities to reduce unnecessary consumption.
​
Our water-efficiency opportunities include better metering, leak detection, water-efficient equipment and improved cleaning processes. Monitoring water use more closely can help us spot unusual consumption and identify where changes could make a difference.
MAKING USE OF
STORMWATER IN WALES
At our Wales site, a stormwater system is expected in early 2027. The intention is to capture rainwater runoff and put it to suitable uses such as vehicle washing and toilet flushing. Using collected rainwater for these purposes can reduce the amount of mains water we need, while managing the water that runs off the site during rainfall.
​
We are also considering rainwater capture for suitable non-drinking uses as part of the design of our new Bradford factory. The final approach will depend on the design and the practical requirements for storing and using the water safely.
MAINTAINING HIGH STANDARDS ACROSS OUR OPERATIONS
Food safety is central to the way we manufacture and handle our products. We maintain our standards through our BRCGS AA-certified food safety management system, supported by documented procedures, regular checks, training and monitoring. These controls help us manage risks and maintain consistent standards from incoming ingredients through to finished products.
HACCP & PROCEDURES
We use HACCP, hygiene and allergen procedures to identify and manage food safety risks throughout our processes.
APPROVED
SUPPLIERS
We use supplier approval and monitoring to help ensure the ingredients and materials entering our business meet our requirements.
AUDITS &
CHECKS
We carry out internal audits, environmental and product testing, and quality and safety checks. We review results and take corrective action where needed.
TRACEABILITY
We record incoming raw materials and finished products through production and dispatch. This allows us to trace products back to their ingredients and through our distribution process.

BUILDING EFFICIENCY INTO OUR
FUTURE OPERATIONS
Our new Bradford factory gives us the opportunity to build sustainability into the way the site is designed and operated from the outset. We are planning with the whole operation in mind, looking at how we can make better use of energy and water, choose efficient equipment and reduce the resources needed to keep the factory running.
Our plans cover the building, the equipment inside it and the way we monitor and manage our resources. This includes:
SOLAR
GENERATION
We plan to include solar panels, with a proposed capacity of 502.90 kWp. Generating electricity on site could help meet some of the factory's energy needs.
REFRIGERATION AND MACHINERY
We plan to select efficient refrigeration and production equipment, considering energy and water performance alongside capacity, food safety, reliability and whole-life cost.
FULLY ELECTRIC
SITE
Our current design is based on an all-electric factory with no gas on site. We are also considering lower-carbon heating options, including air-source heat pumps, as the building design and utilities are developed.
MONITORING AND
STORAGE
We are exploring smart energy monitoring and battery storage alongside the planned solar installation, helping us better understand and manage how energy is used across the factory.
LED
LIGHTING
LED lighting is planned throughout the factory, with lighting intended to be sensor-controlled. This will help us use light where and when it is needed, rather than wasting energy in areas that are not in use.
RAINWATER AND
SMARTER USE
We are exploring ways to manage water more efficiently, including collecting rainwater for suitable non-drinking uses, such as toilet flushing. Water monitoring and other efficiency measures will also be considered as the factory design develops.
The factory is still in development, so some specifications will be confirmed as the design progresses and final approvals and utilities arrangements are agreed. Our aim is to consider sustainability across every part of the project, rather than adding individual measures as an afterthought.

